The TM-600 mobile radio delivers reliable analogue communications for desktop or in-vehicle deployments.
The TM-600 can indicate the channel on its numerical 8-segment display. In addition, LEDs show the channel search and transmitting power.
Produces clear announcements from the vehicle.
LED showing channel search & transmitting power
When receiving an HDC2400TM or HDC1200 signal, the display shows the identication or the name of the caller. The firmware of the radio transceiver supports a selective call list with up to 128 entries (128 for TM-610, 8 for TM-600).
This function protects against unauthorised use of lost or rented devices using a remote-controlled blocking of the transmitting/receiving mode. A blocked device can be used again only after entering the unblock code.
The DTMF call function provides you with exible dialling procedures, such as dial by names, automatic dialling, repeat dial and manual dialling. Frequently dialled call numbers can be stored individually and easily accessible in the call number memory.
With the loudspeaker function, the audio signal of the microphone is transferred to the external loudspeaker via the powerful amplifier. This produces clear announcements from the vehicle.
The numeric 8-segment display shows the operating channel. In addition, LEDs show the channel search and transmitting power.
|Frequency ranges||136 – 174 MHz 400 – 470 MHz|
|Channel spacing||12.5 / 20 / 25 kHz|
|Operating voltage||13,6 V DC ± 15 %|
|Current consumption||Standby mode: 0.5 A Receiving mode: < 2.0 A Transmitting mode < 5 A (5 W) / < 8 A (25 W)|
|Operating temperature range||- 30 °C to + 60 °C|
|Frequency stability||± 2.5 ppm|
|Dimensions (H × W ×D)||152 mm × 43 mm × 125 mm|
|Antenna impedance||50 Ω|
Hytera TM-600 product brochures and user manuals.