IC-F1000D/F2000D Series

A new range of compact, waterproof digital two way radios

IC F1000D F2000D Series

Waterproof Digital Two-way radios

Available in both VHF and UHF, the radios provide intelligent emergency functions and loud audio in a slim, waterproof chassis. The IC-F1000D series features make it ideal for a diverse range of business users including those in the manufacturing, facilities, security, retail and the hospitality markets.

IP67 Rated

Waterproof and Dust-tight Protection

Motion detection

Man down & Lone worker functions

Battery pack

Provides up to 18 hours


IP67 Waterproof and Dust-tight Protection

The IC-F1000D/F2000D has a compact 52.2×111.8×30.3mm body and weighs only 260g (with BP-280 battery pack and belt clip). The IC-F1000D/F2000D has an extremely rugged construction providing superior protection against water (1m depth for 30 minutes), dust, sand, mud and other objects. The radio is also tested to MIL-STD 810 specifications and is designed to withstand harsh use.

IDAS 6.25kHz Digital Operation

The IC-F1000D/F2000D operates in conventional digital, Type-D single site trunking as well as analogue mode and provides an uncomplicated mixed mode migration path for business. The NXDN protocol offers 6.25kHz spectrum efficiency, higher security and better audio clarity – even on the fringes of the communication range.

The following IDAS features are programmable:

  • PTT ID (TX)
  • Individual/group calls
  • Radio check (RX)
  • Stun/Kill/Revive (RX)
  • Remote monitor (RX)
  • Emergency (TX)
  • Call alert (RX)
  • Digital voice scrambler (15-bit)
  • Status Call (Power ON/OFF status and GPS request)
  • Voting scan for multi-site conventional operation
  • TX: Transmit, RX: Receive

Built in motion detection, man down and lone worker functions

To assist worker safety, the IC-F1000D/F2000D has three emergency related functions: motion detection, man down and lone worker functions. If one of these functions is activated, the transceiver automatically enters an emergency phase and starts counting down to send an emergency signal. The built-in motion sensor detects position, state of motion and non-motion.

Long Lasting Battery Pack

The large capacity waterproof battery pack, BP-280 (2400mAh typ.), provides 18 hours of operating time*. The supplied rapid charger BC-213* charges the BP-280 in 3.5 hours.
* Tx: Rx: Standby=5:5:90. Power save function ON. BC-213 may be not supplied depending on version.

Easy to Hear in a Noisy Environment

The large 36mm speaker of the transceiver provides clear 800mW* audio. The built-in BTL amplifier increases the audio output power and delivers loud and intelligible voice to a radio operator working in noisy environments.
* Typical with internal speaker.

Built-in 5-Tone (Analogue mode)

The IC-F1000D/F2000D has built-in 5-Tone, CTCSS and DTCS signalling capability for analogue mode group communication and selective calling. The IC-F1000D/F2000D can be used as an analogue transceiver ready for future digital migration.

Optional GPS Speaker-Microphone

With the optional HM-171GPW GPS speaker-microphone, GPS position data can be attached to a voice or data transmission such as responding a GPS request status call.

Other Features

  • DTMF autodial memories
  • MDC functions: PTT ID, emergency call, radio check (RX) and stun/revive (RX)
  • BIIS PTT ID call
  • Surveillance function
  • Escalating alarm
  • VOX capability for hands-free operation
  • Channel announcement function
  • Red emergency switch on the top panel

Downloadable Content

ICOM IC-F1000D/F2000D Series product brochures and user manuals.


Operating Guide

Get Support

Working With

Discover your perfect partner